New guidance covers alarms, escape planning, electrical checks, and common household fire risks.
WILMINGTON, Del. – Oct. 5, 2026 – X-SENSE has released a new home fire safety guide based on the unique fire hazards in each area of the home. Advice on bedrooms, kitchens, living areas, basements, garages, and utility areas, focusing on where to place alarms and the importance and frequency of checks and planning for emergencies, is included.
Bedrooms and other surrounding hallways should be carefully examined since a fire could start whilst sleeping. Install smoke alarms as per the manufacturer’s instructions and local requirements, taking into account if the alarm can be heard from sleeping areas.
It is also a good idea to have exits clear of furniture and stored items in the household. A fire escape plan should include exit routes, an outside gathering place, and someone to assist in case of emergency.
Fire is not the only hazard that may require detection. Carbon monoxide can be produced by fuel-burning appliances and other combustion sources, yet it cannot be identified reliably by sight or smell. In suitable locations, a combination smoke and carbon monoxide alarm can monitor both hazards in one device.
Using a different approach for the kitchen is demanded with regard to safety in that context. Cooking appliances, electrical equipment, heat sources, and combustible materials will be assembled near each other. All cooking should be in an area supervised, flammable objects should be removed from the area before cooking, and damaged cords/plugs should be fixed rather than ignored.
There may be multiple electrical devices in common areas, such as living rooms. Cables, plugs, and receptacles should be inspected for damage or overload in chargers, extension cords, lamps, portable heaters, and entertainment equipment. Cords should not be attached to rugs or furniture under which they might become damaged.
A single alarm could not be clearly heard in larger homes or multi-story homes. Interconnected alarms can be used to ensure that a fire is alarming in more than one location if compatible alarm systems are used together.
One system referenced in the guidance is the X-SENSE SC07-MR smart smoke and carbon monoxide alarm.
In larger homes, basements, garages, and utility areas should also be considered when reviewing fire safety. These spaces may contain heating equipment, electrical panels, laundry appliances, chargers, vehicles, and stored materials that can introduce additional fire risks.
Regular checks can help identify damaged wiring, overloaded electrical connections, blocked ventilation, or combustible materials placed too close to heat-producing equipment.
Smoke and carbon monoxide alarms should be tested and maintained according to the manufacturer’s instructions. Homeowners should pay attention to low-battery warnings, fault signals, and end-of-life notifications, and replace alarms when required. Regular maintenance can help ensure that installed alarms remain ready to provide an alert when needed, but alarms are only one part of a broader fire safety plan that also includes proper installation, clear escape routes, and a household emergency plan.
About X-SENSE Innovations
Founded in 2013, X-SENSE Innovations develops residential fire and home safety products, including smoke alarms, carbon monoxide alarms, heat alarms, combination alarms and connected home safety systems. X-SENSE USA LLC is registered at 1209 Orange St., Wilmington, DE 19801.
More information is available at X-SENSE.
Media Contact
Farrukh
X-SENSE
service@x-sense.com
+1 (833) 952-1880
https://www.x-sense.com/
